{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Master Tap SteelHT machine tap HSS-E-PM Form B, TiCN, G: G1/8
Article no.: 327698
Catalog no.: 133312
Article code:
- Thread type: G
- Flank angle: 55
- Tool material: HSS E PM
- Standard: DIN 5156
- Taper lead form: B
Product details
Technical Data
| Series | Master Tap | |
| Thread size | G1/8 | |
| Coating | TiCN | |
| Thread type | G | |
| Flank angle | 55 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 5156 | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.907 mm | |
| Threads per inch | 28 | |
| Thread ⌀ | 9.73 mm | |
| Overall length L | 90 mm | |
| Shank ⌀ Ds | 7 mm | |
| Shank square □ | 5.5 mm | |
| Tapping hole ⌀ | 8.8 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | red | |
| Number of cutting edges Z | 3 | |
| Thread depth | 29.19 mm | |
| Type of product | Tap |
Identification & Classification
| Article number | 327698 | |
| Catalog number | 133312 | |
| EAN / GTIN | 4062406236038 | |
| Manufacturer number | 133312 G1/8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
30
P
20
P
15
P
12
H
5
H
15
H
5
M
7
S
5
Description
Version:
High-performance tap, specially developed for use in steels with high tensile strength and for difficult-to-machine materials. Strong spiral point, for process stability at high cutting forces.
- HSS-E-PM tool material – for very high cutting edge stability.
- Optimised honed cutting edges.
- TiCN coating – for maximum wear protection.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).
Recommendation:
For TOOLOX and HARDOX materials we recommend deviating from the DIN data (see table) by selecting a larger tapping hole diameter.