{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Indexable insert for milling SOMT....20ER-LD, for high feed rate indexable face mills, CA6535
Article no.: 589257
Catalog no.: 222084
Article code:
Product details
Technical Data
| Type | CA6535 | |
| Tool material | Carbide | |
| Programming radius at ap max | 3.5 mm | |
| Feed fz per tooth | 0.03 − 1.2 mm | |
| Number of changes/inserts | 4 | |
| Indexable insert size | 10 | |
| Insert thickness E | 4.76 mm | |
| Type of product | Indexable insert for milling |
Identification & Classification
| Article number | 589257 | |
| Catalog number | 222084 | |
| EAN / GTIN | 4960664708277 | |
| Manufacturer number | TMA05608 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 NEUSS, Germany, www.kyocera-unimerco.de |
Application Table
S
30
Description
Version:
4-edge indexable inserts with convex cutting edges for low cutting forces.
Application:
LD geometry is also suitable for high cutting depths (ap max= 5 mm) at moderate feed rates.
Do not use for helical, plunging or contour milling, or on steep walls.
Do not use for helical, plunging or contour milling, or on steep walls.
Note:
Standard application values for ae = 0.3×D.