{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Corner media track for individual configuration, suitable for type: 1000
Article no.: 608336
Catalog no.: 928421
Article code:
- Colour selection: RAL 9002, 7035, 7016, 5012, 5005
Product details
Technical Data
| Material thickness | 1.5 mm | |
| Colour selection | RAL 9002, 7035, 7016, 5012, 5005 | |
| Width | 1,000 mm | |
| Depth | 100 mm | |
| Installation height | 139 mm | |
| Divider unit | 16 units | |
| Plug type, input | GST plug-in system | |
| Nominal voltage | 250 V | |
| Type of current | AC | |
| Empty modules (1 unit / 2 units / 3 units) | 4× / - / 4× | |
| suitable for type | 1000 | |
| Type of product | Power module |
Identification & Classification
| Article number | 608336 | |
| Catalog number | 928421 | |
| EAN / GTIN | 4062406116088 | |
| Manufacturer number | 928421 1000 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Can be fitted with a total of 16 individual modules (up to 8 modules per side), each with 1 unit divider No. 928470.
Description:
Technical data for industrial plug-in system (No. 928490; 928491; 928492):
- Maximum connection value 230 V / AC, 16 A or 400 V / AC, 16 A.
- Total load capacity at AC: 3.5 kW.
- Maximum connected load, three-phase AC: 10.5 kW.
- Conductor cross-section of the pre-assembled cables:
3 × 1.5 mm2 for single-phase AC (L, N, PE)
5 × 1.5 mm2 for three-phase AC (L1, L2, L3, N, PE) - Protection class 1
- Index of Protection IP 20.
Suitable for:
Note:
Initial connections and also the connection of plugs or sockets to cables should only be performed by a qualified electrician!
Warning:
Intended use
Reasonably foreseeable misuse
- Use the workbench only when in good technical condition.
- If any faults occur which may affect safety, rectify them without delay.
- Only mount components on the designated holes Exclusively use approved Hoffmann Group accessories for modifications or rebuilding.
- For work in indoor industrial environments.
- For use on dry solid floors.
- Operate only in a dry environment.
Reasonably foreseeable misuse
- Do not place or position on the workbench.
- Do not carry people.
- Not for use in areas where the floor slopes upwards or downwards.
- Do not use in explosion hazard areas.
- No do expose it to water, precipitation or contamination.
- Not for use in areas where the floor is loose or unpaved.
- Do not overload the workbench, worktop, drawers or storage shelves.
- Do not make any unauthorised modifications.