{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Smooth rolling tool EGI5-32AI universal, Shank mounting type: S20
Article no.: 646247
Catalog no.: 291530
Article code:
- Cutting direction: Left-hand and right-hand
Product details
Technical Data
| Shank mounting type | S20 | |
| Cutting direction | Left-hand and right-hand | |
| Overhang LA | 154 mm | |
| Tip centre offset f | 73.2 mm | |
| Usable length LN | 100 mm | |
| Minimum pre-drill ⌀ Dmin | 32 mm | |
| maximum rolling force | 3 kN | |
| Roll ⌀ | 5 mm | |
| Shank square | 20×20 mm | |
| Type of product | Smooth rolling tool |
Identification & Classification
| Article number | 646247 | |
| Catalog number | 291530 | |
| EAN / GTIN | 4060491000237 | |
| Manufacturer number | EGI5-32AI-1-SL20-WL100 | |
| Manufacturer/responsible person | ECOROLL AG Werkzeugtechnik, Hans-Heinrich-Warnke-Straße 8, 29227 - CELLE, Germany, www.ecoroll.de |
Description
Version:
For use on CNC and conventional lathes.
With symmetrical structure – can be used universally as right-hand or left-hand version.
High flexibility due to external and internal use.
Independent of diameter (within the recommended range) for internal machining.
With symmetrical structure – can be used universally as right-hand or left-hand version.
High flexibility due to external and internal use.
Independent of diameter (within the recommended range) for internal machining.
Advantage:
Surface quality Rz < 1 µm possible.
Feed rates up to 1 mm/rev possible (external machining).
Consistent results due to continuous measurement of the rolling force.
Feed rates up to 1 mm/rev possible (external machining).
Consistent results due to continuous measurement of the rolling force.
Application:
For mechanical surface finishing.
For machining all metallic materials up to a tensile strength of 1400 N/mm2 and a hardness of up to 45 HRC.
For external ⌀ from 10 mm and internal ⌀ from 32 mm.
For machining all metallic materials up to a tensile strength of 1400 N/mm2 and a hardness of up to 45 HRC.
For external ⌀ from 10 mm and internal ⌀ from 32 mm.
Suitable for:
⌀ range outside (recommended): 10 mm – 100 mm
⌀ range inside (recommended): 32 mm – 150 mm
⌀ range inside (recommended): 32 mm – 150 mm
Supplied with:
Two spare rolls built in the cage.
Note:
- Other shank connections on request.
- Detailed technology recommendations can be found in the instruction manual.