{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Profil SolarMetal P H50 400 mm AL
Réf.: 2242872
N° de catalogue.: 8321
Référence:
Détails du produit
Caractéristiques techniques
| L | 400 mm |
Identification et classification
| Référence article | 2242872 | |
| Numéro de catalogue | 8321 | |
| EAN / GTIN | 8001132121900 | |
| Réf. fabricant | 574515 | |
| Catégorie d'articles | QNF |
Description
Avantage(s):
- Short rails for cost optimisation and no problems with thermal expansion.
- Flat and wide base allows two fixing points on each rib.
- Suitable for the entire fischer clamp range.
- SolarMetal P H50 is compatible with the installation of photovoltaic optimizers: the 50 mm height supports improving the ventilation of the modules.
Champ d'application:
- Installation of portrait oriented photovoltaic panels on trapezoidal sheet roofs.
Notes d'application:
- Choose between long and short rails depending on the installation layout and taking into account thermal expansion.
- Determine the centre distance of the fastenings according to the trapezoidal metal sheet geometry, snow and wind loads (use SOLARPANEL-FiX software to design the system).
- Stick a layer of CG INT butyl adhesive tape (minimun lenght 80 mm) on the trapezoidal metal sheet rib before applying and fixing the rail.
- Position the rail on the trapezoidal metal sheet.
- If fixing with ALG rivets, drill the rail and the sheet together with a 5.5mm diameter drill bit.
- For fixing with EPDM self-drilling Solar screw, pre-drill the rail, then place it on the sheet and screw the self-drilling screw through the pre-drilled hole.
- Seal the rivets or screws with fischer SB - Bitumen Sealant.